Duke Cooling Vest
The DRY evaporative cooling vest is a comfortable, formfitting, lightweight and easy to (re)fill vest that will cool people when cooling is necessary. No refrigeration or additional gels or chemicals are required. The vest will improve performance and reduce heat stress and fatigue.
- Five colors; fluor yellow, black, royal blue, khaki and silver grey
- Six sizes; XS, S, M, L, XL, XXL
- Zipper closure
- Because of our patented system, the vest will not be wet or soggy, and is therefore also suitable for wearing underneath other clothing.
The DRY evaporative cooling vest can be (re)filled with (normal drinking) water (600 ml maximum), cooling will start immediately. The cooling is based on an evaporation process of the available water in the vest.
The functional fibers make the vest convenient to wear, it’s absolutely dry on the outside. They cool down the area of the cardiovascular system on the upper body mostly affected by thermal stress. The system is designed for professional use. This dry cooling technology provides fully automatic activation and control and ensures that the cooling vests are ready for use 24 hours a day.
Dexter Cooling Vest:
Our roughed do it all PCM vest offers constant cooling capacity for people who need cooling underneath protective work wear or extreme heat situations. Medical applications are also possible for constant cooling situations.
Our PAC Dexter black is the go to vest for welders in Nomex suites or military- and security personal. Inside the vest there are 4 pockets for our bio-based PCM cooling packs. Buckles allow tight fit, while being stored safely in the pockets of the vest. Reactivation is easy. Switch to a new pack and reactivate the other pack by putting these in a refrigerator, a freezer or ice water. In some occasions the packs are activated by the ambient temperature and you do not need anything at all. The activation time depends on the temperature of the PCM inserts (15°C / 21°C / 29°C). For instance the PCM 15°C insert takes about 45 minutes in the freezer and a few hours in a refrigerator. The PCM 29°C insert can simply be re-activated in about 3 hours at room temperature (20°C / 68F).
Ozzie Dry cooling Cap:
The evaporative cooling cap is a lightweight and easy to fill cap that will cool your head whenever cooling is needed. On the job, during sports, but also during leisure time, for intance on the beach, this cap will help to avoid thermal stress.
- Four colors; fluor yellow, royal blue, khaki and silver grey
- One size fits all
- Because of our patented system, the cap will not be wet or soggy.
The evaporative cooling cap can be (re)filled with (normal drinking) water (100 ml maximum), cooling will start immediately. The cooling is based on an evaporation process of the available water in the cap.
The functional fibers of the cap are convenient to wear and are absolutely dry on the outside.
Jagger helmet insert with neck protector:
With this dry helmet insert, people that have to wear a safety helmet in warm or hot environments, can keep their head cool to avoid heat stress.
The evaporative cooling insert can be refilled with (normal drinking) water, cooling will start immediately. The cooling is based on an evaporation process of the available water in the cap.
Because of our patented system, the cap will not be wet or soggy.